Click Image to Enlarge
STAGE 3 Turbo Upgrade Kit Without
Turbo Toys and With Turbo Toys
Mopar knows that more is better, and the Turbo Upgrade Kits from Mopar
Performance are just the thing to power the 2.4L Turbo to new heights.
These kits kick it up with lots more than just tweaks to the turbocharger.
For maximum power and torque, the Stage 3 Turbo Kit will be the ultimate
upgrade for your SRT-4. The Stage 3 Turbo Upgrade Kit (with and
without Turbo Toys) boosts power to an awesome 310 hp at 5600 rpm
and 325 ft.-lbs. of torque at 3200–4800 rpm. The Stage 3 Kit with Turbo
Toys in high-octane mode increases power to an amazing 355 hp at 5200
rpm and 365 ft.-lbs. of torque at 3200–4800 rpm! The Mopar
Performance Cat-Back Exhaust System (P4510461) is required to obtain
these power figures.
- Increased WOT and part throttle boost
- Boost hold feature during WOT shifts
- More aggressive exhaust note during deceleration
- Optimized calibration for the Mopar Performance
Blow-Off Valve Conversion Kit (P4510548—sold
separately)
- Increased rev. limit from 6240 RPM to 6500 RPM
Includes:
Stage 3 PCM with Block-Off Connector
TD05HR-15GK2-10cm2 Turbo Unit and Manifold: 16% larger
compressor wheel diameter to flow and compress more intake air, 19%
larger turbine wheel diameter to flow more exhaust gas and reduce back
pressure, 67% more turbine scroll area for reduced back pressure
TiAl (Titanium Aluminide) Turbine Wheel with significantly less
rotational inertia than the standard Inconel steel; less inertia results in
reduced turbo lag and better turbo response.
High-Flow (180 lph 75 psi) Fuel Pump Module
Pressure Regulated Fuel Rail Assembly with 4.0 Bar
Returnless Regulator and Hose Kit
(4) 682 cc/min Fuel Injectors†
3.0 bar MAP Sensor†
3.0 bar TIP Sensor†
Turbo Toys Hardware and Components†
| If you purchase Stage 3, S&P recommends the following: |
 | |  | |  | |  |